The 12 Best Table Saws of 2020 (Reviews, Top Picks and Ratings)

With the competition being as tough as it is on the table saw market, it might be very hard to decide which saw is right for you. Available models range from tiny 4” saws to full-sized stationary beasts made for harder tasks. When shopping for a table saw, you should take the motor type, blade and its cutting depth, rip capacity, and safety features into consideration. Also, look for the inclusion of a miter gauge.

In this article, we’ll explain how to pick the table saw that suits your needs. We will then take a look at the best table saws in our table saw reviews section before answering some frequent questions about table saws.

How to buy the right table saw

First things first, get your buying criteria right..

What type of Saw do you need?

Table saws are available in two basic forms – stationary and portable. Cabinet saws are the largest among stationary models. They also tend to be the most powerful and expensive. Contractor models, on the other end of the spectrum, are a little lighter. Hybrid models offer a compromise between contractor and cabinet saws.

In the portable table saws league, benchtop models are the smallest. Portable saws don’t feature support stands. Compact models are a step above them, being similar to contractor models, only with smaller tables. Jobsite table saws are the biggest option. They are significantly more rugged and powerful than compact and benchtop models and are intended for construction site use. Many have cast iron frames.

Motor Type

There are two main motor types – belt drive and direct drive.

  • Belt drive motors are more dominant in the stationary class. They offer more power and torque than direct-drive motors. In models with belt-drive system, the motor is frequently removed from the blade and thus less exposed to dust. They’re also more durable.
  • Direct drive motors are more affordable and are thus found in cheaper models. On the positive side, they’re low-maintenance, smaller, and lighter. On the flipside, they offer less power and are a bit noisy.

Important Features

Like with all power tools, there’s a list of key features to consider with table saws.

First, you should consider the size and the quality of the blade. 10” blades are a standard today. They usually come with 24 to 40 teeth, often made of carbide. Standard cutting depth at a 90-degree angle should range between 3” and 3.5”. If you need bigger, some models also have 12” blades.

Rip capacity largely determines the size of the pieces you can work with. If you intend to work at a job site, look for models with more than 24” of rip capacity. For smaller home projects, you can go with a more compact table. You should also consider the quality and reliability of the rip fence.

It is essential for a table saw to have a miter gauge. That way, you can precisely measure the angle at which you’re cutting. The gauge needs to be adjustable if you plan on making compound cuts. Some models also have lockable gauges.


Table saws are known as potentially very dangerous tools. [1] Therefore, you should pay extra attention to the safety options your future table saw offers. [2] Here are some to look for:

  • Riving knife. This is essentially an upgraded splitter that sits at the same height as the blade. It can replace the old-fashioned guard and can travel up and down, along with the workpiece.
  • Anti-kickback pawls. These are used to minimize the kickback. You can find them on either side of your saw’s splitter and catch the stray material.
  • SawStop. Some high-end models also have electronic sensors that can stop the blade and retract it once they detect your hand has touched the blade. [3]

More than 30,000 injuries are caused by table saws each year. Hands and fingers are most often injured.

Table Saw Reviews

1. Shop Fox W1819 – The Best Overall Table Saw

[amazon fields=”B004IYJ9Y2″ value=”thumb” image_size=”large” image_alt=”Shop Fox W1819 3 HP 10-Inch Table Saw with Riving Knife”]


  • 3HP Leeson belt drive engine
  • Anti-kickback pawls
  • 4” dust port
  • Camlock T-fence
  • Polycarbonate blade guard
  • 10” blade
  • Adjustable miter gauge
  • Riving knife and blade guard included

See On Amazon

The Shop Fox W1819 is a true powerhouse and the best table saw on our list. This hybrid table saw boasts a 3HP belt drive engine made by Leeson that can cut through pretty much anything. It works at 220V and it’s a single-phase unit.

This table saw also features big wings, a camlock T-fence, quick-response blade guard, and magnetic switch. The blade is a 10” unit, paired with a riving knife. An adjustable miter gauge is also included.

In the safety department, the W1819 has a clear polycarbonate guard that keeps you safe while allowing you to see what you’re cutting. The metal spreader doesn’t let the kerf pinch the blade, thus effectively preventing kickbacks.

The W1819 also has a 4” dust port, making maintenance easier. The setup process is fairly intuitive. Other important features include dado and standard table inserts, a sloped cabinet floor, powder coated paint, and anti-kickback pawls.

BEST SUITED FOR – those looking to up their game and switch from casual to professional tools.

If you’re looking for a mighty saw that is easy to use and jam-packed with advanced features, you will adore the Shop Fox W1819.

2. DeWalt DWE7491RS – The Most Reliable Table Saw

[amazon fields=”B00F2CGXGG” value=”thumb” image_size=”large” image_alt=”DEWALT (DWE7491RS) 10-Inch Table Saw, 32-1/2-Inch Rip Capacity”]


  • 15 amp belt drive motor
  • 10” blade with carbide tips
  • Lightweight frame with wheels
  • 3.125” maximum cutting depth
  • Riving knife and blade guard included
  • Adjustable miter gauge
  • 32.5” rip capacity

See On Amazon

If you’re a contractor and you’re looking for a quality, reliable table saw, you might like the DeWalt DWE7491RS. This great jobsite table saw comes with plenty of power and great mobility. Also, it offers good rip capacity.

This contractor table saw has a sturdy and powerful belt drive motor that delivers plenty of torque and has a maximum of 4,800rpm. It is also equipped with a lightweight and durable frame for easier transportation. The frame has a set of two wheels for when you need to move the saw around the job site. The overall weight of this saw is 48lbs.

The blade on this model is a 10” unit with 24 carbide teeth. The maximum cutting depth at the straight angle is 3.125”. If you slant it to 45 degrees, the maximum depth decreases to 2.25”. The dust collector has a 2” port; not the biggest one around, but still efficient.

In terms of rip capacity, the DWE7491RS has a 26.25×22” table. The table can be extended to 32.5” to accommodate larger workpieces. This saw has a riving knife and blade guard.

BEST SUITED FOR – contractors, as it offers a fantastic ratio of mobility and power.

Picking the right table saw boils down to your needs and preferences. Hobbyists should pick smaller and pros should go for bigger models.

3. SawStop CNS175-TGP36 – The Safest Table Saw

[amazon fields=”B006G36VHG” value=”thumb” image_size=”large” image_alt=”SawStop CNS175-TGP36 1.75Hp Contractor Saw 36″ Prof T-Glide Fence SYS”]


  • 1.75HP belt drive motor
  • Maximum rip capacity of 52”
  • SawStop system
  • 3.125” maximum cutting depth
  • 10” blade with 40 carbide tips
  • 4” dust port
  • Riving knife and blade guard included
  • Adjustable miter gauge

See On Amazon

If you have a big garage or home shop and you’re looking to invest in a stationary table saw, this might be the best table saw for you. The SawStop CNS175-TGP36 is a heavy-duty table saw and it packs quite a punch. Previous experience on smaller saws is recommended.

This saw rocks a strong 1.75HP belt drive motor that delivers huge amounts of torque. It is coupled with a standard-issue 10” blade with a set of 40 carbide teeth that can rip through pretty much anything. It also has a miter gauge and a riving knife.

The blade has a maximum cutting depth of 3.125” at 90 degrees. At a 45 degree tilt, it is 2.25”. When it comes to dust collection, the CNS175-TGP36 is equipped with a 4” port. The table is 36” wide, though it can be expanded to 52”, winning the title of the widest saw table on our list.

Like all SawStop models, the 36” option is also equipped with the SawStop advanced safety features. This system can stop and retract the blade in 0.005 seconds when the sensors detect that your hand has touched the blade.

BEST SUITED FOR – large home workshops and smaller businesses.

4. Skilsaw 3410-02 – The Best Budget Table Saw

[amazon fields=”B003HIWQZ4″ value=”thumb” image_size=”large” image_alt=”SKIL 3410-02 10-Inch Table Saw with Folding Stand”]


  • 15 amp belt drive motor
  • 5,000rpm no-load speed
  • Foldable frame
  • 47-degree tilt
  • Rip fence can auto-align
  • 10” blade with carbide teeth
  • 3.5” cutting depth
  • 32” rip capacity
  • Adjustable miter gauge
  • Riving knife and blade guard included

See On Amazon

If you’re on a tight budget and need a quality, reliable table saw, consider the Skilsaw 3410-02. This table saw is lightweight but strong, and it offers an impressive cutting capacity considering its size.

It comes with a cast aluminum table that measures 20”x26”. If you need extra space, you can extend the longer side to 32”. The maximum cutting height is 3.5” when the blade is at 0 degrees, which is more than enough for 4X materials. At a 45-degree angle, it can go as deep as 2.5”, while the maximum tilt is 47 degrees.

This saw has a sturdy, well-built 15 amp belt drive motor that offers lots of power. It is a direct drive unit that can spin the blade up to 5,000rpm. It is rated at 120V. The blade measures 10” and has carbide teeth. It is sturdy enough for home projects, but insufficient for professional use. The rip fence can align itself to ensure measurement precision.

The 3410-02 is equipped with a rolling stand that’s sturdy and light, as well as easy to fold if you need to move the saw. When fully assembled, this saw weighs around 45lbs, which makes it easy to transport. The riving knife and see-thru blade guard are the main safety features of this great saw.

BEST SUITED FOR – home projects and DIY-ers with experience.

5. Makita 2705 – The Most Versatile Table Saw

[amazon fields=”B0027FFKWY” value=”thumb” image_size=”large” image_alt=”Makita 2705 10-Inch Contractor Table Saw”]


  • 10” blade with carbide teeth
  • 3.625” maximum cutting depth
  • Modular blade guard
  • Does 0.8125” dado cuts
  • 4,800rpm no-load speed
  • Modular blade guard
  • 15 amp belt drive motor
  • Adjustable miter gauge

See On Amazon

If you’re looking for versatility, good performance, and quality build, you should check out the Makita 2705. This is a contractor class table saw, good for both job sites and home workshops. It hails from Japan and packs a standard 15 amp belt drive motor that can spin up to 4,800rpm. Plus, it features an electric brake.

The blade is a regular 10” unit with carbide tips and a maximum tilt of 45 degrees. At the regular 90 degrees, this powerful saw can reach a depth of 3.625”, though when fully tilted, it can cut as deep as 2.5”.

The table can be extended to the right. This model can also do dado cuts, with 6×0.8125” blades being the biggest it can use.

In the safety section, this Makita offers a modular blade guard that can be easily adjusted according to the needs of your current project. The guard is tool-less, a feature unique to Makita.

BEST SUITED FOR – contractors looking for versatility.

6. DeWalt DWE7480 – The Best Portable/Jobsite Table Saw

[amazon fields=”B00F2CGVPE” value=”thumb” image_size=”large” image_alt=”DEWALT DWE7480 10 in. Compact Job Site Table Saw”]


  • 15 amp belt drive motor
  • 4,800rpm no-load speed
  • 24” rip capacity
  • 10” blade with 3.125” cutting depth
  • 45-degree tilt
  • Blade guard and riving knife included
  • Adjustable miter gauge

See On Amazon

If you need a proper portable table saw for your job site, you should try the DeWalt DWE7480. This compact saw has a 15 amp belt drive engine that can spin at 4,800rpm.

The blade on this saw is a standard 10” unit with carbide teeth and an adjustable miter gauge. You can use it for all types of wood, as well as other materials. It also has a 24.5” rip with built-in support. As for safety, this model also features a riving knife and a sturdy blade guard.

A sturdy metal frame surrounds the base of the saw and you can easily fix it to the surface should the need arise. The front panel of the housing is equipped with a blade height adjusting wheel and the blade angle adjuster.

The maximum blade angle is 45 degrees and you can cut as deep 2.25” at full tilt. On the other hand, 3.125” is the maximum cutting depth at 90 degrees. The diameter of the dust port is the standard 2.5”.

Weighing just below 50lbs, the DeWalt DWE7480 is a lightweight machine. This means that you can easily transport it from one place to another on the construction site.

BEST SUITED FOR – those searching for lightweight jobsite table saw.

Models with belt drive motors have more power and are more durable, but direct drive motors offer better bang for the buck.

7. Grizzly G0690 – The Most Rugged Table Saw

[amazon fields=”B0029VN2SA” value=”thumb” image_size=”large” image_alt=”Grizzly Industrial G0690-10″ 3HP 220V Cabinet Table Saw with Riving Knife”]


  • 3HP belt drive motor
  • 3.125” maximum cutting depth
  • 12” rip capacity to the left and 29” to the right of the blade
  • Features a quick-release blade guard and a riving knife
  • Adjustable miter gauge

See On Amazon

The Grizzly G0690 is a professional class cabinet table saw model. It is designed for serious tasks and is best used as a stationary saw in your shop. 

This table saw is equipped with a 3HP belt drive motor that works at 220V instead of the standard 110V. It is a Leeson unit and it can spin the blade at 4,300rpm with no load. Also, it is equipped with a triple belt drive system.

The blade on this model is a regular 10” unit with the left tilt. The blade cuts as deep as 3.125” at a 90-degree angle and 2.1875” at a 45-degree angle. An adjustable miter gauge is also included.

Regarding the rip capacity, the G0690 has 12” to the left of the blade and 29” to the right of it. It should also be noted that the cutting table is 34” above the floor, making it one of the most comfortable table saws to work with.

It comes with a riving knife with quick release. The blade guard is also a quick-release type.

BEST SUITED FOR – in-shop work.

8. Gino Development TruePower 01-0819 – The Best Small Table Saw

[amazon fields=”B00GKRON1E” value=”thumb” image_size=”large” image_alt=”TruePower 01-0819 Mini Electric Table Saw, 4-Inch”]


  • 1HP belt drive motor
  • 3.375” blade with carbide tips
  • Automatic guard return
  • Works at 120V
  • Plastic casing

See On Amazon

The Gino Development TruePower 01-0819 is our pick for the best small table saw. The overall size of this tabletop model is just 7x7x8.5” and it weighs next to nothing. This is a great addition to any hobbyist’s garage workshop.

Obviously, you can’t do heavy-duty projects on this saw. The casing is made of plastic, but it’s sturdy enough provided you handle it with care.

The motor is a 1HP belt drive unit that’s connected to a 3.375” metal blade with carbide tips. It works at 120 volts. This small saw also features dual handles for improved stability while cutting, as well as an automatic guard return.

Owing to the minimalistic design, you can’t expand the table on this saw. You also have to mount it on a table, as it doesn’t have its own frame. It also lacks some safety features you might find on bigger models. On the other hand, it is affordable and simple to use.

BEST SUITED FOR – hobbyists working with smaller projects.

9. SkilSaw SPT70WT – The Best Direct Drive Model

[amazon fields=”B01AX4B7I6″ value=”thumb” image_size=”large” image_alt=”SKILSAW SPT70WT-01 10 In. Portable Worm Drive Table Saw”]


  • 15 amp worm drive motor
  • 10” blade with carbide teeth
  • 46-degree tilt
  • 3.5” maximum cutting depth
  • Brass driving gears
  • 25” rip capacity
  • Adjustable miter gauge
  • Blade guard and riving knife are included

See On Amazon

If you’re looking for a model with worm drive, you should definitely take a look at the SkilSaw SPT70WT. This jobsite table saw comes with brass gears – in fact, it was the first model with this feature when it launched several years ago.

Having gears instead of belts reduces the number of parts that can get stuck and malfunction. However, there’s a bit less torque and the engine’s more exposed to dust. The main safety features include a clear blade guard and a riving knife.

The motor inside the housing is SkilSaw’s own Dual-Field unit that works at 15 amps. It is exceptionally good at keeping cool, so you won’t need to take frequent breaks during your projects. The engine is a smooth-start unit and it works at 220 volts.

Like many other jobsite table saws, this one has a 10” blade with carbide tips. The maximum cutting depth is 3.5” at a 90-degree angle. The miter gauge goes to 46 degrees. In terms of rip capacity, the table offers you 25” of space.

The SPT70WT is equipped with a sturdy metal chassis with rubber-coated bumpers and angles. It weighs just below 50lbs and is very easy to transport. Also, it is easy to set up.

BEST SUITED FOR – light-to-intermediate tasks.

10. SawStop PCS175-TGP236 – The Best Cabinet Table Saw

[amazon fields=”B009C7NF0Y” value=”thumb” image_size=”large” image_alt=”SAWSTOP 10-Inch Professional Cabinet Saw”]


  • 1.75HP or 3HP belt-drive motor
  • SawStop included
  • 52” maximum rip capacity
  • Cast iron trunnion
  • 4” dust port
  • 10” blade with 40 teeth
  • 3.125” maximum cutting depth
  • Comes with a riving knife
  • Adjustable miter gauge

See On Amazon

Manufacturers are in something of an arms race when it comes to cabinet table saws. Our top pick for 2019 is the SawStop PCS175-TGP236.

This saw offers a strong and sturdy belt-driven motor; you can go with the 1.75HP or the 3HP option. The motor is connected to a standard 10” blade with a set of 40 teeth. The ribbed belts ensure that it works smoothly with low vibration.

The fence on this model is made of thick steel and you can set it anywhere between 30” and 52” away from the blade. This mighty saw also has a 4” dust port that can get rid of up to 99% of dust.

The top safety feature here is the SawStop functionality. When you’re working and your hand touches the blade, it will retract into the table and stop spinning immediately. The official data say that the blade takes half a millisecond to stop and retract. The blade guard is sold separately.

BEST SUITED FOR – professionals looking to invest in a powerful saw for daily use.

11. Bosch GTS1031 – The Best Value Model

[amazon fields=”B004O7FX20″ value=”thumb” image_size=”large” image_alt=”Bosch 10-Inch Portable Jobsite Table Saw GTS1031 with One-Handed Carry Handle”]


  • 4HP motor with belt drive
  • 47-degree maximum tilt
  • 5,000rpm maximum blade speed without a load
  • Steel frame
  • Modular blade guard with anti-kickback pawls
  • 10” blade with carbide teeth
  • Adjustable miter gauge
  • 3.125” maximum cutting depth
  • 18” rip capacity

See On Amazon

Bosch offers a line of portable saws, and the best among them is the GTS1031. This model is compact, easy to transport, and built to last. 

At its heart, there is a 4HP motor with belt drive, a unit much stronger than many stationary models, which can come in very handy when you’re on a job site and you need that extra power. The motor is a 15 amp unit and can spin the blade at a staggering 5,000rpm when there’s no load.

This saw also has some neat safety options. For example, it has a modular blade guard that’s equipped with a set of anti-kickback pawls. The blade guard is see-thru, letting you see what you’re cutting.

The blade is 10” in diameter and has a 3.125” cut depth at the regular 90-degree angle. The maximum depth you can get at 45 degrees is 2.25”. The maximum tilt, however, is 47 degrees.

The total weight of this mighty saw is 52lbs, while the rip capacity is a rather modest 18”. The fence is auto-adjustable, which is a nice bonus. Finally, the chassis is made of durable steel, meaning the Bosch GTS1031 can take quite a beating.

BEST SUITED FOR – professionals and advanced DIY-ers.

12. Shop Fox W1837 – The Best Hybrid Table Saw

[amazon fields=”B01987G1K8″ value=”thumb” image_size=”large” image_alt=”Shop Fox W1837 10″ 2 hp Open-Stand Hybrid Table Saw”]


  • 2HP belt-driven motor
  • Cast iron trunnions
  • 4” dust port
  • See-thru blade guard
  • 10” blade with carbide tips
  • Anti-kickback pawls
  • 3.25” cutting depth
  • Adjustable miter gauge
  • Riving knife
  • 30” rip capacity

See On Amazon

Those looking for the best of both worlds – portability and raw power – will find it in the Shop Fox W1837. This hybrid table saw is light enough that you can move it around the shop and transport it, but also powerful enough to take on professional and heavy-duty tasks.

Firstly, the Shop Fox W1837 is built to last through the ages. It is sturdy and stable, despite not being the heaviest table saw out there. At its core, there is a 2HP motor made by Leeson and it is combined with a 10” blade. The motor has a standard triple-belt drive and the arbor can reach a respectable 3,450rpm.

In terms of rip capacity, this saw can give you 30” to the right side of the blade and 15” to the left. The 40-tooth blade can cut up to 3.25” deep at the default 90-degree angle, though at 45 degrees, the maximum depth decreases to 2.25”. An adjustable miter gauge is also included.

The W1837 also has a large 4” dust port, a clear guard that allows you to see what you’re cutting, a spreader, and a miter gauge among many other features. Safety features include anti-kickback pawls, a riving knife, and a see-thru blade.

BEST SUITED FOR – professionals looking to combine mobility with professional-grade cutting power.


Yes, you can use an 8” dado blade on your 10” table saw. The sizes don’t have to match and you can always go for a smaller dado.

But you wouldn’t want to go the other way around and use a dado blade that has a bigger diameter than your saw’s primary blade. This might cause all sorts of problems, the biggest of which is the clearance.

Also, the bigger the blade, the faster the tips get, and the difference in speed might get you in trouble.

It all depends on your needs and what you are looking for.

For example, if you’d like to do bigger projects and cut bigger pieces, then go for a table model. Otherwise, a miter saw might be your best bet. Also, table models are much better when it comes to rip cuts.

Other advantages of table models include versatility, abundance of power, and the ability to work with sheet materials. They’re also more dangerous and need much more space.

Miter saws can work with miter cuts and angled cuts, and are also great for bevel cuts. Also, they’re far safer than their table counterparts. On the downside, you can’t cut large workpieces on them or do rip cuts.

The short answer is no. You shouldn’t try to fit anything on a table saw that’s larger than the equipment it’s built for. It’s unsafe, you might damage or even ruin the motor completely, and you may actually get less cutting power.

The Verdict

When it comes to the title of the best table saw, the verdict should depend on your preferences and projects ahead. Here’s a quick recap of our reviews:.

  • Shop Fox W1819 – Best for professionals who want top quality
  • DEWALT DWE7491 – Best for those who prize reliability above all
  • SawStop CNS175-TGP36 – Best for those who want maximum safety
  • Makita 2075 – Best for those looking for superior versatility
  • DEWALT DWE7480 – Best for jobsite projects
  • Grizzly G0690 – Best for those who need an extra sturdy table saw
  • Gino Development TruPower 01-0819 – Best for those who want a tabletop model
  • SkilSaw SPT70WT – Best for fans of direct drive motors
  • SawStop PCS175-TGP236 – Best for those looking for a top-notch cabinet model
  • Bosch GTS1031 – Best for those looking to get the most quality for their money
  • Shop Fox W1837 – Best for those looking for a high-quality hybrid table saw

At the end of the day, when shopping for a table saw, you should make sure to consider the motor type, safety features, cutting depth, and rip capacity of each saw you shortlist. Also, don’t forget to check whether the package includes a miter gauge.

  1. Chung, K. C., & Shauver, M. J. (2013, November). Table saw injuries: Epidemiology and a proposal for preventive measures.
  2. Table Saw Accident Stories and statistics (n.d.)
  3. How does SawStop work? Find out more today. (n.d.).

Leave a Comment

Share via
Copy link
Powered by Social Snap